[ Soil, Waste & Vent Pipes ] [ Underground Drainage Pipes ] [ Cold Water Services & Industrial Pressure Pipes ] [ General Purposes Pressure & Non Pressure Pipes (Japanese Standard) ] [ Cable Cover Plates ] [ Uniplas uPVC Conduit Pipes ] [ Unica PVC Pipe Spacer ]

Soil, Waste & Vent Pipes The Soil, Waste and Vent (SWV) uPVC Pipes are commonly used for Sanitary stack. They are largely utilised in HDB projects, Private Condominiums, Industrial & Commercial Buildings. These pipes are also suitable as rainwater downpipes and for other water discharge purposes. Available in white colour, the sizes range from 1-1/4" to 6" in diameter. The dimensions are as follows: uPVC Pipes for Soil, Waste and Vent Application to SS213: 1979 equivalent to BS4515 and AS 1415 Nominal Size Outside Diameter Wall Thickness (min) mm 20ft Container Load Approx. Qty (Lens) Inches mm Mean Diameter (min) mm Incl. Ovality (min) mm 1 - 1/4 1 - 1/2 2 3 4 6 32 40 50 80 100 150 36.2 42.8 55.7 82.3 110.0 160.0 36.1 42.7 55.5 82.1 109.6 159.5 2.1 2.3 2.4 3.0 3.2 4.0 4100 2950 1750 800 451 210 The Internal and external surfaces of the pipes are clean, smooth and reasonably free from grooving and other defects. Joint by solvent cement welding, these pipes are used for above-ground installation. The tensile strength is at least 45mpa and the elongation at break is not less than 40%. Due to its impact strength, they are able to be installed in long length.

[ Finished Products ] [ Custom Molding ] [ Tooling & Mold Making Service ]

[ Back To Home ] [ About Singa | Core Businesses | Enquiry | What's New | Sitemap ] Singa Plastics Limited No.1 Fourth Chin Bee Road Singapore 619697 Tel: +65 6265 0922 (8 Lines), +65 6261 0673 (Sales Dept) Fax: +65 6265 7194 (Sales) Email : splsales@singaplastics.com